Description

Visbella Headlight Restoration System Manual

Thank you for choosing the Visbella Headlight Restoration System. This manual will guide you through restoring your headlights to their original clarity and brightness.

Step 1: Preparation

Before starting the restoration process, clean the headlights thoroughly with soap and water. Remove any dirt, grime, or debris that may be present on the surface. Dry the headlights entirely before proceeding to the next step.

Step 2: Masking

Use the provided masking tape to protect the surrounding areas of the headlights, such as the paintwork and trim. This will prevent any accidental damage or discolouration during the restoration process.

Step 3: Application

Apply a small amount of the Visbella Headlight Restoration Compound to the included applicator pad. Gently rub the compound onto the surface of the headlight in a circular motion. Continue this process until the entire headlight is covered.

Leave the compound on the headlight for a few minutes to allow it to penetrate and remove any oxidation or yellowing. Do not let the compound dry completely.

Step 4: Polishing

Using a clean, dry microfiber cloth, buff the headlight in a back-and-forth motion to remove the remaining compound and restore clarity. Continue polishing until the headlight is smooth and free of haze or cloudiness.

Step 5: Finishing

Remove the masking tape and inspect the restored headlights. If necessary, repeat the process for any areas that require further restoration. Once satisfied with the results, clean the headlights with water and dry them thoroughly.

With the Visbella Headlight Restoration System, you can enjoy improved visibility and a renewed appearance for your headlights. Follow this manual carefully for optimal results.